Conventional Dryer
| Name | Quantity | Total power | |
| ECO oil burners 6 | 6 | from 300 to 600 sq m (currently set to 300kw) | Fuel consumption approx. 1l per 15kw / hour |
| Drum rotation motor | 1 | 7,5 kw | Rotations adjustable from 10 to 60 per minute |
| Exhaust fan | 1 | 2,2 kw | 75% efficiency |
| Steam extraction fan | 1 | 4kw | 100% efficiency |
| Heat exchanger fan | 1 | 3kw | |
| 1.5m conveyor belt | 1 | max 0,55 | |
| 12m conveyor belt | 1 | max 0,75 | |
| 2m conveyor belt | 1 | max 0,35 | |
| Additional devices | 2kw | ||
| Inverter for controlling drum rotation | 1 | 0,2kw | |
| Power plug | 32a 5 pins |
Additional equipment on request
1."Drying function in circulation" until the proper humidity is obtained, the goods circulate in the dryer.
2. The temperature inside the pipe is measured using 6 sensors
3. Function for recovering 60% of heat from exhaust gases (Hot air exchanger for the dryer)
4. Fan air filter for heat exchanger
5. Exhaust gas ventilator with higher temperature resistance
6. Rollers to leave the dryer from the container
7. Designing the dryer to fit in a container
8. Rotary connector for sensors waterproof IP66
9. System ensuring complete emptying of the dryer (drum)
10. Palnikio eco 6 (higher efficiency and better oil burning)
11. Distributed (plugs) power supply for all 3 conveyors
12. Drum roller bearings resistant to high temperatures
13. Kalczuk drum wheels (quieter drum operation)
14. Cylinders for adjusting the dryer angle
15. Fuel filters 6 pcs
The main advantages of the dryer
The dryer can dry goods at any temperature up to 360 * C, thanks to which we can set a temperature that does not pose a risk of explosion (e.g. 150 * C)
Heating of dried goods takes place by contact with a hot pipe, which increases the efficiency by up to 400% than in traditional dryers heated only by hot air.
Drying in circulation allows to obtain the required humidity even at low drying temperatures
When you buy an additional humidity sensor for dried material, you can completely automate the dryer
The system of heat recovery from flue gas allows for savings and faster heating of the goods
Warranty 12 month
Efficiency from 40% to 10% ok.2 t/h
Dryer assembly place Ventilated building
Safety conditions
The burners can only be started when the drum is spinning and the exhaust fans are switched on Fans from flue gases should be connected under the chimney or other tight channel outlet from the building The building must have running and efficient ventilation during drying. Systematic control of smoke color from burners (exhaust ventilator) Smoke must not be black, there is a risk of soot collecting and setting the device on fire. If the smoke is black, please contact an oil burner service technician The steam exhaust fan must be running all the time during drying and connected to the outlets outside the room where the dryer is located